Easy Plug and Play Radios for Irlp

Next Generation IRLP Embedded Nodes

Pricing, Details, and How to Order

IRLP - Keeping the Radio in Amateur Radio

Created April 21st, 2014 - Last update May 15th, 2019

Currently OUT OF STOCK, unable to obtain parts due to COVID19

Download the Instruction Manual

View Pictures of Completed Systems

TECHNICAL DETAILS

IRLP v3.0 board mounted and wired
- All inputs an outputs available at a single DB-9 connector
- No need to wire audio cables to the sound card
Dual Core 1.86 GHz Fanless Intel Atom (4 virtual processors)
2 Gigabytes of RAM
32 Gigabyte (or larger) Industrial micro-SATA Solid State Disk
VGA and HDMI video outputs
Wide range DC voltage input (8-19V DC)
- Uses 2.5mm x 5.5mm coaxial power connector
- Can run from repeater site 13.8VDC power supply
- Can be powered from an automobile 12V system
Compact case (with optional fan - NOT required)
- 8.25" x 2.6" x 10.8" or 210mm x 65mm x 275mm
- About same size as a ream of 8.5" x 11" (or A4) paper

FEATURES

PHP and Perl Web Enabled
- IRLP WEB ADMIN system installed
- IRLPvCON, IRLPvMON, and IRLPvMAP installed
- Easy to add on additional PHP or Perl scripts to enhance system
Solid State m-SATA Drive
- Boots quickly (15 seconds)
- No need to swap RAM (faster)
- Reduced noise
- Reduced power consumption
Full Repeater Controller
- Node can act as a simple single port controller
- Adjustable hangtimes, courtesy tones, access tones, etc
- Easy scripting and scheduler engine to customize any way you want
FULL Debian Linux Pre-installed
- Runs a full version of Debian, so can add any Debian supported programs
- Node number already assigned and tested (new or existing)
- You choose your IRLP node number (from available numbers)
- All hardware already pre-configured
Versatile Input Options
- 2 x RS-232 serial ports available on-board (not external). Great for repeater controllers
- Up to 8 USB ports (4 external, 4 internal)
- Allows direct interface to controller or remote radios at site
All wiring internal to case
- No external parallel port cable
- No external audio jack wiring
- All interfacing to radio through a single DB-9 connector
Commonly used IRLP scripts and features already installed:
- IRLPvCON, IRLPvMON, IRLPvMAP
- EchoIRLP
- IRLP Controller
- IRLP Web Admin
- Saytime/date scripts
- Star69
- Interval CW or voice ID
Simple configuration script turns on/off certain features easily

PRICING

Complete unit: wired, built, and tested $689.99 US
Includes:
- Come with Compact Fanless Case
- OPTIONAL 1RU Rack Mount Case (only 10 inches deep) - (+ $100.00 US) - Front and Rear USB Ports
- DC Power cable (6 foot length) with bare ends
Pricing Options:

- AC Power Adapter (+ $35.00 US)
- 60W AC Adapter
- Wide input range (100-240VAC, 50-60Hz)
- Comes with North American grounded plug, but uses standard IEC C13/14 cable
- 802.11N Wifi Adapter (+ $35.00 US)
- Compact USB adapter
- 150mbps 802.11b/g/n 2.4GHz
- Configures easily by manipulating a text file
- Internet Streaming Kit (+ $50.00 US)
- Used to stream your node's audio to an icecast/shoutcast server
- Broadcast your local repeater/node to the world
- DXZone, Broadcastify, Streema, RadioReference
- Sends both sides of the conversation
- Comprised of a USB sound card and resistive audio cable
- Configures easily by manipulating a text file ** Canadian orders are subject to GST/HST at their local rate.

SHIPPING

Canada Post Shipping from Vancouver - Approx 10 lbs
- 3-7 Day Ground to USA or Canada - $40 US
- 5-7 Day Air to International - $130 US
- 20-50 Day Surface to International - $100 US
From Order to Delivery Time 1-4 weeks (longer for surface international)
- Pieces ordered and built in Canada
- Rush orders available upon request for additional charge

ORDER NOW

Please consider a donation to IRLP. It helps fund research and development to improve IRLP for all!

Click to join irlp-embedded on Groups.io

pattersonfisittests.blogspot.com

Source: https://www.irlp.net/embedded/